TFortis PSW-1G4F-UPS Switch - an Outdoor 4-Port Managed Switch with Built-in UPS designed for networking IP- video surveillance systems. It can be switched to unmanaged mode.

PSW-1G4F-UPS model has 2 gigabit interfaces: SFP slot (100/1000Base-X) for the organization of extended sections of video transmission via optics and “copper” RJ-45 port with Speed Autonegotiation (10/100/1000Base-T). “Copper” port with Speed Autonegotiation allows you to integrate the switch into any existing network including those where gigabit speeds are not supported.

TFortis PSW-1G4F-UPS Switch can be used together with both PSW-2 and PSW-1 series in a project. 

Built-in Uninterruptible Power Supply (UPS) allows the backup power supply to both switch itself and IP video cameras powered via PoE. When the mains voltage deviates from the norm, the switch will be switched to autonomous power from the accumulator battery.

You can learn battery life from the table:

Load*, W 5 10 15 20 25 30 35 40 45 50
Time, h 5:40 4:10 3:10 2:30 2:10 1:50 1:40 1:30 1:10 1:00

PSW-1G4F-UPS is a compact weatherproof box from durable high-quality plastic. Dimensions of the device do not exceed 240х160х90 mm, which makes it convenient for installation in places where other devices are problematically to place. Moreover, IP66 protection makes the unit unpretentious to the operating conditions.

* For equipment implemented since 31.03.2016

Interfaces

  • 4 ports 10/100Base-Tx RJ-45 РоЕ;
  • 1 port 100/1000Base-X SFP;

Switch supports any gigabit SFP-modules. 
Recommended SFP modules for use. .

  • 1 port 10/100/1000Base-T RJ-45.
PoE
  • PoE standard: 802.3af; 
  • Passive PoE support;
  • port power:  15.4 W, mode A;
  • port power:  15.4 W, mode B;
  • PoE power budget for IP-video cameras: 50 W;
  • PoE power budget for ТН-02 (ТН-03) camera housings: 50 W.
Features
  • Monitoring IP-video camera hanging;
  • IP-video cameras and camera housings are powered by one cable, twisted pair;
  • Preheating of camera housings;
UPS
  • Accumulator battery type: 12V, 2.2A*h;
  • Accumulator battery quantity: 4pcs.;
  • Accumulator battery dimensions: 178х35х61 mm;
  • Standby operation mode at:
    • full disconnection from mains voltage;
    • mains voltage above/below the norm (phase unbalance);
    • 380V voltage (zero loss).
Protocols
  • STP (802.1d)/RSTP(802.1w);
  • IGMP Snooping v2;
  • VLAN (802.1q);
  • Flow Control (802.3x);
  • Quality of Service(QoS, 802.1p).
Monitoring
  • SNMP v1, v3;
  • Cable tester;
  • SNMP Traps;
  • Syslog;
  • System log;
  • Tamper sensor;
  • Dry contacts for connecting external sensors.
Management 
  • Web-interface;
  • Telnet;
  • SNMP v1;
Physical parameters
  • Mean time between failures is more than 75 000 hours (8,6 years);
  • Supply voltage:  230VAC (from 187V to 253V);
  • Max power consumption: 220W;
  • Protection level against the external influences: IP66;
  • Operating temperature: -45 to 40°С;
  • Max weight: 6kg;
  • Dimensions: 360 х 240 х 120 mm;

* For equipment implemented since 31.03.2016

Declaration of compliance with the Technical Regulation of the Customs Union “On Safety of Low-Voltage Equipment”, “Electromagnetic Compatibility of Technical Devices” for Fort-Telecom equipment - PSW switches. No ТС RU C-RU.АЛ16.В.01739
Validity: 26.09.2014 - 25.09.2019
Move up