TFortis PSW-2G4F-UPS Switch has been developed based on TFortis PSW-2G-UPS and the number of ports in the model has been increased. Now, one 4F series switch cansimultaneously service four IP video cameras, not three, as it was before.

TFortis PSW-2G4F-UPS - an Outdoor 4-Port Gigabit Managed Switch with built-in UPS designed for networking IP- video surveillance systems based on PSW-2G4F switch.

PSW-2G4F-UPS is a compact weatherproof box made of durable high-quality plastic. Dimensions of the device do not exceed 360х240х120 mm, which makes it convenient for installation in places where other devices are problematically to place. Moreover, IP66 protection makes the unit unpretentious to the operating conditions.

PSW-2G4F-UPS includes:
  • Managed switch with two gigabit SFP slots for the organization of extended sections of data transmission via optics;
  • PoE midspan for remote power supply of IP video cameras and camera housings;
  • Lightning protection modules for Ethernet ports and 220V PU;
  • Hanging Control module for video cameras;
  • Preheating Module for camera housings that is used for comfortable start of video cameras;
  • Two inputs (dry contacts) for connecting tamper switches or other sensors;
  • 4 accumulator batteries for autonomous power supply for the system;
  • Charge Control Unit for accumulator batteries;
  • Power stabilizer accumulator batteries;
  • Voltage Control Relay that disables the mains voltage in case of deviation from the norm;
  • System for maintaining their own microclimate;
  • Two power units;
  • Microcontroller providing service functions and WEB control;
  • Compact casing and convenient mounting elements.

Fast Ethernet ports are designed for connecting 4 IP-video cameras. They support PoE that remotely power both IP video camera and TFortis TH-02 or TFortis TH-03 PoE camera housings over simple UTP/FTP 4-pair cable.

Gigabit Ethernet ports (SFP slots) are for connection to the backbone network. The switch is not binded to a specific model of the SFP-module and the user has the opportunity to install the most suitable SFP-module for specific conditions. Two gigabit ports allow you to connect the switch in a chain or ring topology, which is most relevant when leasing communication lines or lacking free fibers in an optical cable.

Built-in Uninterruptible Power Supply (UPS) allows the backup power supply to both switch itself and IP video cameras powered by PoE. When the mains voltage deviates from the norm, the switch will switch to autonomous power from the accumulator battery.

Following is considered as deviations from the norm:
  • full disconnection from mains voltage;
  • mains voltage below the permissible threshold (phase unbalance);
  • above the maximum threshold (phase unbalance);
  • applied voltage 380V (zero loss).

TFortis PSW-2G4F-UPS has convenient management via user-friendly Web-based interface, Telnet text interface and SNMP commands.

* For equipment implemented since 31.03.2016

Interfaces

  • 4 ports 10/100Base-Tx RJ-45 РоЕ;
  • 2 ports 1000Base-X SFP.

Switch supports any gigabit SFP-modules. 
Recommended SFP modules for use

PoE
  • PoE standard: 802.3af;
  • Passive PoE support;
  • port power: 15.4 W, mode A;
  • port power: 15.4 W, mode B.
  • PoE power budget for IP-video cameras: 50 W;
  • PoE power budget for ТН-02 (ТН-03) camera housings: 50 W.
Features
  • Monitoring IP-video camera hanging;
  • IP-video cameras and camera housings are powered by one cable, twisted pair;
  • Preheating of camera housings;
UPS
  • Accumulator battery type: 12V, 2.2A*h;
  • Accumulator battery quantity: 4 pcs.;
  • Accumulator battery dimensions: 178х35х61 mm;
  • Standby operation mode at:
    • full disconnection from mains voltage;
    • mains voltage above/below the norm (phase unbalance);
    • 380V voltage (zero loss).
Protocols
  • STP (802.1d)/RSTP(802.1w);
  • IGMP Snooping v2;
  • VLAN (802.1q);
  • Flow Control (802.3x);
  • Quality of Service (QoS, 802.1p).
Monitoring
  • SNMP v1, v3;
  • Cable tester;
  • SNMP Traps;
  • Syslog;
  • System log;
  • Dry contacts for connecting external sensors.
Control
  • Web-interface;
  • Telnet;
  • SNMP v1;
Physical parameters
  • Mean time between failures is more than 50 000 hours (5-7 years);
  • Supply voltage: 230VAC (from 187V to 246V);
  • Max power consumption: 220W;
  • Protection level against the external influences: IP66;
  • Operating temperature: -45 to 40°С;
  • Max weight: 4kg;
  • Dimensions: 360 х 240 х 120 mm;

 

* For equipment implemented since 31.03.2016

Declaration of compliance with the Technical Regulation of the Customs Union “On Safety of Low-Voltage Equipment”, “Electromagnetic Compatibility of Technical Devices” for Fort-Telecom equipment: Switches, Midspans, Media Converters. No. ТС N RU Д-RU.АЛ16.В.34692
Validity: 03.06.2014 - 02.06.2019
Declaration of compliance with the Technical Regulation of the Customs Union “On Safety of Low-Voltage Equipment”, “Electromagnetic Compatibility of Technical Devices” for Fort-Telecom equipment - PSW switches. No ТС RU C-RU.АЛ16.В.01739
Validity: 26.09.2014 - 25.09.2019
Move up