Midspan FSE-4B is designed for powering up to 4 IP video cameras via PoE. IP video camera is powered over free cable pairs (4, 5 and 7, 8); meanwhile, data is transmitted over pairs 1, 2 and 3, 6. The device has operating temperature range -150С to +400. 220V voltage is supplied without an additional adapter. Each port of the device is protected from overloads, short circuits, surges and static discharges.
Powering IP video cameras via PoE provides great benefits. At least you save on the power cable, plus accessories, plus work. This is especially noticeable when the camera is located at a great distance from the switch. On the other hand, you are not tied to places of electricity concentration. This allows you to place video cameras where they need to be placed.
Warning! The midspan is recommended for use with the TFortis TH-02 and TFortis TH-03.
* For equipment implemented since 31.03.2016
Powering the IP video camera via PoE provides great benefits. At least you save on the power cable, accessories and work. This is especially noticeable when the camera is located at a great distance from the switch.
If FSE-4B is connected through an uninterruptible power supply (UPS), then immediately 4 video cameras will be reserved for power. FSE-4B makes it possible to build an uninterrupted system quite economically.
Built-in UPS of the FSE-4B midspan is resistant to substandard power supply. The margin of safety of the components is much higher than that of foreign manufacturers. This ensures stable operation of both the midspan and the IP-video camera.
FSE-4B midspan does not only work out the interference of the mains voltage, but also provides high-quality power to the video cameras themselves, what allows you to save expensive equipment.
A frequent reason for the camera to hang is poor-quality power supply. FSE-4B midspan provides quality power supply to video cameras. You can reduce the cost of the system maintenance by using it.
4 IP video cameras can be connected simultaneously to the FSE-4B midspan. This results in saving on midspans.
FSE-4B device is powered by simple 220V mains voltage. This voltage is directly supplied to the midspan; no external network adapters are required.
* For equipment implemented since 31.03.2016