TFortis PSW-2G6F+Box - an Outdoor Gigabit Managed Switch designed for 6 IP-cameras or other IP devices connection with the PoE/PoE+ power supply (up to 60W at two ports, up to 30W at any port) and for data transmission over optical network.
Features
- All-weather design with IP66 dust and moisture protection
- Enclosure with 100% corrosion protection and IK10 impact protection rating
- Operation at temperatures -60 to +50 C due to industrial components
- double PoE+ (up to 60W) support for two switch ports
- PoE+ (IEEE802.3at) support for all switch ports
- Two optical ports allow to connect switches in a line or a ring
- Built-in optical distribution frame for convenient optical cable installation
- Tamper sensor for unauthorised access control
- Built-in voltage-check relay for equipment protection in emergency situations on power networks
- Built-in lightning protection for Ethernet ports and power supply 230VAC for pulce interferences protection
- Convenient power connection node with a circuit breaker and terminal clamps
TFortis PSW-2G8F+UPS-Box includes:
- switch board
- power supply unit
- optical distribution frame
- circuit breaker
- terminal clamps
- IP66 enclosure
Note! Accessories for fiber optic welding (shrincable plastic sleeves, pigtails, adapters, patch cords) are not included.
Ports for IP-cameras
- 10/100Base-Tx with RJ-45: 6 pcs.
- number of ports with PoE: 6 pcs.
- PoE standard: 802.3 af / 802.3 at
- passive PoE support
- power per port: up to 60 W at ports 1 and 2, up to 30 W at any port
- PoE power budget for IP cameras: 160 W
- data and PoE transmission distance: up to 100 m
Uplink ports
- 1000Base-X with SFP: 2 pcs.
Capacity
- сommunication matrix: 5.2 Gbps
- switching rate: 10.65 Mpps
- MAC-address table: 8K
- packet buffer: 1 Mb
- MTU: 1522 bytes
Management
- Web-interface
- Telnet
- SNTP
- SNMP v1, v3
- SNMP Trap
- DHCP Client
- TFTP Client
- Syslog
- system log
L2 level functions
- Flow Control (802.3x)
- IGMP Snooping v2
- LLDP
- Port mapping
- STP (802.1d)/RSTP(802.1w)
VLAN
- 802.1q Tagged VLAN
- Port based VLAN
- VLAN Trunking
- maximum VLAN id: 4096
- maximum number of active VLANs: 100
QoS
- 802.1p Quality of service
- CoS
- ToS
Additional functions
- Automatic camera restart:
- no connection to the video camera (Link)
- no responce to service requests (Ping)
- reducing the flow from the camera (Speed)
- on schedule (Time)
Inputs/outputs
- tamper sensor
- "dry contact" input: 1 pc.
Built-in lightning protection
- corresponds to class 4 GOST R 51317.4.5 standard
- maximum impulse for supply lines: 4 kV
- maximum impulse for Ethernet line: 2 kV
- impulse duration: 1/50 ms
Power supply
- power supply voltage: 230 VAC (from 187V to 253V)
- maximum power consumption: 280W
- power consumption (without PoE load): 10W maximum
Built-in optical distribution frame
- adapter panel: 8 slots, SC (duplex LC)
- number of slots in a splice cassette: 32 schrincable plastic sleeves
- sleeve size: 40 or 60 mm
Note! Accessories for fiber optic welding (shrincable plastic sleeves, pigtails, adapters, patch cords) are not included in a scope supply
Automatic circuit breaker
- qty: 1 pc.
- nominal current: 6A
- number of poles: 1
- release characteristic: С
Feed-through terminals
- qty: 6 pcs.
- type of clamp: spring
- wire section: 0.5 - 4 sq m
- nomanal current: 32A
Enclosure
- material: reinforced polycabponate
- environmental protection rating: IP66
- impact protection rating: IK10
- cable glands:
- PG9 - 8 pcs. cable diameter 4-8 mm
- PG13,5 - 5 pcs. cable diameter 6-12 mm
Physical parameters
- weight: 7kg;
- Dimensions (cable glands are excluded): 300 х 400 х 210 mm
Operating conditions
- operating temperature: from -60 to +50 C
- meantime between failures: at least 75 000 hours (8.6 years)