Delivered on prior order. Lead time time is 1-2 months
TFortis PSW-2G+UPS-Ex unit - is a special purpose managed gigabit outdoor switch designed for 4 IP cameras or other IP devices connection with PoE/PoE+ power supply (up to 60 W per port at any port) in hazardous areas and data transmission over optical cable.
Switch structure consists of two units: Switch unit (Exd-version) and Battery unit (Exd-version), connected by two cables with quick-detachable explosion-proof connectors.
Features:
- explosion-proof label 1Ex d IIB+H2 T6 Gb
- All-weather design with IP66 or IP67 dust and moisture protection
- Operation at temperatures -60 to +40 C due to industrial components
- Double PoE+ (up to 60W) support for all switch ports
- Two optical ports allow to connect switches in a line or a ring
- Built-in UPS allows for backup power supply of both the switch itself and IP cameras powered with PoE;
- Built-in optical distribution frame for convenient optical cable installation
- Built-in lightning protection for Ethernet ports and power supply 230VAC for pulce interferences protection
- Convenient power connection node with terminal clamps
Switch structure
- Switch board;
- Power supply unit;
- Optical Distribution Frame;
- Feed-through terminal;
- Circuit breaker;
- Explosion-proof enclosure;
- Cable glands
- Lithium iron phosphate (LiFePo) battery;
- Feed-through terminals;
- Packet switch;
- Explosion-proof enclosure;
- Cable glands.
IMPORTANT! Type of the casing, quantity and type of cable glands are determined when ordering.
The battery life can be found in the table:
Total PoE load from all connected cameras |
Switch uptime |
0 W |
42 h 20 m |
10 W |
21 h 10 m |
20 W |
16 h 5 m |
30 W |
10 h 6 m |
40 W |
7 h 25 m |
50 W |
6 h 27 m |
60 W |
5 h 30 m |
70 W |
4 h 55 m |
80 W |
4 h 9 m |
90 W |
3 h 47 m |
100 W |
3 h 20 m |
110 W |
3 h 8 m |
120 W |
2 h 55 m |
130 W |
2 h 40 m |
140 W |
2 h 25 m |
150 W |
2 h 15 m |
160 W |
2 h 3 m |
Ports for IP-cameras
- 10/100Base-Tx with RJ-45: 4 pcs.
- number of ports with PoE: 4 pcs.
- PoE standard: 802.3 af / 802.3 at
- passive PoE support
- power per port: up to 60 W
- PoE power budget for IP cameras: 160 W
- data and PoE transmission distance: up to 100 m
Uplink ports
- 1000Base-X with SFP: 2 pcs.
Capacity
- сommunication matrix: 4.8 Gbps
- switching rate: 9.83 Mpps
- MAC-address table: 8K
- packet buffer: 1 Mb
- MTU: 1522 bytes
Management
- Web-interface (IPv4)
- Telnet
- SNTP
- SNMP v1, v3
- SNMP Trap
- DHCP Client
- TFTP Client
- Syslog
- system log
L2 level functions
- Flow Control (802.3x)
- IGMP Snooping v2
- LLDP
- Port mapping
- STP (802.1d)/RSTP(802.1w)
VLAN
- 802.1q Tagged VLAN
- Port based VLAN
- VLAN Trunking
- maximum VLAN id: 4096
- maximum number of active VLANs: 100
QoS
- 802.1p Quality of service
- CoS
- ToS
Additional functions
- Automatic camera restart:
- no connection to the video camera (Link)
- no responce to service requests (Ping)
- reducing the flow from the camera (Speed)
- on schedule (Time)
Built-in lightning protection
- corresponds to class 4 GOST R 51317.4.5 standard
- maximum impulse for supply lines: 4 kV
- maximum impulse for Ethernet line: 2 kV
- impulse duration: 1/50 ms
Power supply
- power supply voltage: 230 VAC (from 187V to 253V)
- maximum power consumption: 400W
- power consumption (without PoE load): 10W maximum
Uninterruptible power supply unit
- backup mode at:
- complete disconnection of mains voltage;
- mains voltage above/below normal (phase imbalance);
- network voltage 400V (zero loss).
Accumulator batteries
- battery type: LiFePo4;
- number of batteries: 1 pc.
Built-in optical distribution frame
- adapter panel: 8 slots, SC (duplex LC)
- number of slots in a splice cassette: 32 schrincable plastic sleeves
- sleeve size: 40 or 60 mm
Note! Accessories for fiber optic welding (shrincable plastic sleeves, pigtails, adapters, patch cords) are not included in a scope supply
Enclosure
- material: aluminium alloy
- environmental protection rating: IP66 or IP67
Physical parameters
- Switch unit:
- weight: 50 kg;
- dimensions (cable glands are excluded): 464 x 464 x 264 mm;
- Battery unit:
- weight: 30 kg;
- dimensions (cable glands are excluded): 433 x 333 x 225 mm;
Operating conditions
- operating temperature: from -60 to +40 C
- meantime between failures: at least 75 000 hours (8.6 years)
Note! Type of the enclosure and cable glands are selected individually according to the customer’s requirements.