TFortis PSW-2G6F+UPS-Ex Switch

Warranty
period
36
months*

Delivered on prior order. Lead time time is 1-2 months

TFortis PSW-2G6F+UPS-Ex unit - is a special purpose managed gigabit outdoor switch designed for 6 IP cameras or other IP devices connection with PoE/PoE+ power supply (up to 60 W per port for 2 ports, up to 30 W per port at any port) in hazardous areas and data transmission over optical cable.

 

Switch structure consists of two units: Switch unit (Exd-version) and Battery unit (Exd-version), connected by two cables with quick-detachable explosion-proof connectors.

Features:

  • explosion-proof label 1Ex d IIB+H2 T6 Gb
  • All-weather design with IP66 or IP67 dust and moisture protection
  • Operation at temperatures -60 to +40 C due to industrial components
  • Double PoE+ (up to 60W) support for 2 switch ports
  • PoE+ support (IEEE802.3at) for all switch ports
  • Two optical ports allow to connect switches in a line or a ring
  • Built-in UPS allows for backup power supply of both the switch itself and IP cameras powered with PoE;
  • Built-in optical distribution frame for convenient optical cable installation
  • Built-in lightning protection for Ethernet ports and power supply 230VAC for pulce interferences protection
  • Convenient power connection node with terminal clamps 

Switch structure:

  • Switch unit
  • Switch board;
  • Power supply unit;
  • Optical Distribution Frame;
  • Feed-through terminal;
  • Circuit breaker;
  • Explosion-proof enclosure;
  • Cable glands
  • UPS unit
  • Lithium iron phosphate (LiFePo) battery;
  • Feed-through terminals;
  • Packet switch;
  • Explosion-proof enclosure;
  • Cable glands.

IMPORTANT! Type of the casing, quantity and type of cable glands are determined when ordering.

The battery life can be found in the table:

Total PoE load from all connected cameras Switch uptime
  0 W   42 h 20 m
  10 W   21 h 10 m
  20 W   16 h 5 m
  30 W   10 h 6 m
  40 W   7 h 25 m
  50 W   6 h 27 m
  60 W   5 h 30 m
  70 W   4 h 55 m
  80 W   4 h 9 m
  90 W   3 h 47 m
  100 W   3 h 20 m
  110 W   3 h 8 m
  120 W   2 h 55 m
  130 W   2 h 40 m
  140 W   2 h 25 m
  150 W   2 h 15 m
  160 W   2 h 3 m

 

Ports for IP-cameras

  • 10/100Base-Tx with RJ-45: 6 pcs.
  • number of ports with PoE: 6 pcs.
  • PoE standard: 802.3 af / 802.3 at
  • passive PoE support
  • power per port: up to 60 W at ports 1 and 2, up to 30 W at any port
  • PoE power budget for IP cameras: 160 W
  • data and PoE transmission distance: up to 100 m

Uplink ports

  • 1000Base-X with SFP: 2 pcs.

Capacity

  • сommunication matrix: 4.8 Gbps
  • switching rate: 9.83 Mpps
  • MAC-address table: 8K
  • packet buffer: 1 Mb
  • MTU: 1522 bytes

Management 

  • Web-interface (IPv4)
  • Telnet
  • SNTP
  • SNMP v1, v3
  • SNMP Trap
  • DHCP Client
  • TFTP Client
  • Syslog
  • system log

L2 level functions

  • Flow Control (802.3x)
  • IGMP Snooping v2
  • LLDP
  • Port mapping
  • STP (802.1d)/RSTP(802.1w)

VLAN

  • 802.1q Tagged VLAN
  • Port based VLAN
  • VLAN Trunking
  • maximum VLAN id: 4096
  • maximum number of active VLANs: 100

QoS

  • 802.1p Quality of service
  • CoS
  • ToS

Additional functions

  • Automatic camera restart:

     - no connection to the video camera (Link)

     - no responce to service requests (Ping)

     - reducing the flow from the camera (Speed)

     - on schedule (Time)

  • Cable tester

Built-in lightning protection

  • corresponds to class 4 GOST R 51317.4.5 standard
  • maximum impulse for supply lines: 4 kV
  • maximum impulse for Ethernet line: 2 kV
  • impulse duration: 1/50 ms

Power supply

  • power supply voltage: 230 VAC (from 187V to 253V)
  • maximum power consumption: 400W
  • power consumption (without PoE load): 10W maximum

Uninterruptible power supply unit

  • backup mode at:
    - complete disconnection of mains voltage;
    - mains voltage above/below normal (phase imbalance);
    - network voltage 400V (zero loss).

Accumulator batteries

  • battery type: LiFePo4;
  • number of batteries: 1 pc.

Built-in optical distribution frame

  • adapter panel: 8 slots, SC (duplex LC)
  • number of slots in a splice cassette: 32 schrincable plastic sleeves
  • sleeve size: 40 or 60 mm

Note! Accessories for fiber optic welding (shrincable plastic sleeves, pigtails, adapters, patch cords) are not included in a scope supply

Enclosure

  • material: aluminium alloy
  • environmental protection rating: IP66 or IP67

Physical parameters

  • Switch unit:
    - weight: 50 kg;
    - dimensions (cable glands are excluded): 464 x 464 x 264 mm;
  • Battery unit:
    - weight: 30 kg;
    - dimensions (cable glands are excluded): 433 x 333 x 225 mm;

Operating conditions

  • operating temperature: from -60 to +40 C 
  • meantime between failures: at least 75 000 hours (8.6 years)

 

Note! Type of the enclosure and cable glands are selected individually according to the customer’s requirements.

Certificate (Declaration) of compliance with the Technical Regulation of the Customs Union “On Equipment Safety for Operation in Explosion Hazardous Areas”. No. ТС RU C-RU.AA87.B.00244
Validity: Until 12.02.2021
Declaration of compliance with the Technical Regulation of the Customs Union “On Safety of Low-Voltage Equipment”, “Electromagnetic Compatibility of Technical Devices” for Fort-Telecom equipment: Switches, Midspans, Media Converters. No. ТС N RU Д-RU.АЛ16.В.34692
Validity: 03.06.2014 - 02.06.2019
Declaration of compliance with the Technical Regulation of the Customs Union “On Safety of Low-Voltage Equipment”, “Electromagnetic Compatibility of Technical Devices” for Fort-Telecom equipment - PSW switches. No ТС RU C-RU.АЛ16.В.01739
Validity: 26.09.2014 - 25.09.2019
Move up