Delivered on prior order. Production time is 1-2 months
TFortis PSW-2G8F+Ex unit - is a special purpose managed gigabit outdoor switch designed for 8 IP cameras or other IP devices connection with PoE/PoE+ power supply (up to 30 W per port at any port) in hazardous areas and data transmission over optical cable.
Features:
- explosion-proof label 1Ex d IIB+H2 T6 (or T5) Gb
- All-weather design with IP66 or IP67 dust and moisture protection
- Operation at temperatures -60 to +55 C or -60 to +40 C due to industrial components
- PoE+ (IEEE802.3at) support for all switch ports
- Two optical ports allow to connect switches in a line or a ring
- Built-in optical distribution frame for convenient optical cable installation
- Built-in lightning protection for Ethernet ports and power supply 230VAC for pulce interferences protection
- Convenient power connection node with a circuit breaker and terminal clamps
Inside the PSW-2G8F+Ex are:
- Switch board;
- Optical Distribution Frame;
- Power supply unit;
- Feed-through terminal;
- Explosion-proof enclosure;
- Cable glands
IMPORTANT! Type of the casing, quantity and type of cable glands are determined when ordering.
Ports for IP-cameras
- 10/100Base-Tx with RJ-45: 8 pcs.
- number of ports with PoE: 8 pcs.
- PoE standard: 802.3 af / 802.3 at
- passive PoE support
- power per port: up to 30 W
- PoE power budget for IP cameras: 160 W
- data and PoE transmission distance: up to 100 m
Uplink ports
- 1000Base-X with SFP: 2 pcs.
Capacity
- сommunication matrix: 5.6 Gbps
- switching rate: 11.47 Mpps
- MAC-address table: 8K
- packet buffer: 1 Mb
- MTU: 1522 bytes
Management
- Web-interface (IPv4)
- Telnet
- SNTP
- SNMP v1, v3
- SNMP Trap
- DHCP Client
- TFTP Client
- Syslog
- system log
L2 level functions
- Flow Control (802.3x)
- IGMP Snooping v2
- LLDP
- Port mapping
- STP (802.1d)/RSTP(802.1w)
VLAN
- 802.1q Tagged VLAN
- Port based VLAN
- VLAN Trunking
- maximum VLAN id: 4096
- maximum number of active VLANs: 100
QoS
- 802.1p Quality of service
- CoS
- ToS
Additional functions
- Automatic camera restart:
- no connection to the video camera (Link)
- no responce to service requests (Ping)
- reducing the flow from the camera (Speed)
- on schedule (Time)
Built-in lightning protection
- corresponds to class 4 GOST R 51317.4.5 standard
- maximum impulse for supply lines: 4 kV
- maximum impulse for Ethernet line: 2 kV
- impulse duration: 1/50 ms
Power supply
- power supply voltage: 230 VAC (from 187V to 253V)
- maximum power consumption: 200W
- power consumption (without PoE load): 10W maximum
Built-in optical distribution frame
- adapter panel: 8 slots, SC (duplex LC)
- number of slots in a splice cassette: 32 schrincable plastic sleeves
- sleeve size: 40 or 60 mm
Note! Accessories for fiber optic welding (shrincable plastic sleeves, pigtails, adapters, patch cords) are not included in a scope supply
Feed-through terminals
- qty: 30 pcs.
- type of clamp: screw
- wire section: 0.5 - 6 sq m
- nomanal current: 32A
Enclosure
- material: aluminium alloy
- environmental protection rating: IP66 or IP67
Physical parameters
- weight: 30 kg;
- Dimensions (cable glands are excluded): 433 х 333 х 225 mm
Operating conditions
- operating temperature: from -60 to +55 C for T5 temperature marking
- operating temperature: from -60 to +40 C for T6 temperature marking
- meantime between failures: at least 75 000 hours (8.6 years)
Note! Type of the enclosure and cable glands are selected individually according to the customer’s requirements.