TFortis PSW-2G+Ex Switch

Warranty
period
36
months*

Delivered on prior order. Production time is 1-2 months

TFortis PSW-2G+Ex unit - a Switch designed for networking IP-video surveillance in hazardous areas. It is designed based on the TFortis PSW-2G+ switch

TFortis PSW-2G+Ex switch is enclosed in an explosion-proof casing with Explosion-proof label 1Ex d IIB+H2 T6(T5) Gb, which in terms of protection level corresponds to explosion-proof electrical equipment.

IMPORTANT! Type of the casing, quantity and type of cable glands are determined when ordering.

Dust and moisture protection casing - IP67, Operating temperature range -60°С to +40°С/+55°С. This allows using explosion-proof switches both indoors and outdoors. 

Inside the PSW-2G4F-Ex are:
  • Switch board;
  • Optical Distribution Frame;
  • Power distribution unit.
Fields of application of the Explosion-Proof Switch
  • Oil/gas extraction and transportation;
  • Oil refineries;
  • Chemical plants;
  • Black and non-ferrous metallurgy;
  • Pulp and paper industry;
  • Food industry;
  • Medium engineering industry (nuclear power plants, processing plants, etc.);
  • Defense industry;
  • Power industry (CHP, HPP, SDPP, boiler house);
  • Water Supply;
  • Sewerage;
  • Recycling;
  • Marine and inland water transportation.

Physical parameters

  • Explosion-proof label: 1Ex d IIB+H2 T6(T5) Gb;
  • Mean time between failures is more than 75 000 hours (8.6 years);
  • Supply voltage: ~ 230VAC (187V to 253V);
  • Max power consumption: 200W;
  • Protection level against external influences: IP67;
  • Operating temperature: -60 to +40°С/+55°С;
  • Max weight: 25kg;
  • Dimensions excluding glands: 433 х 333 х 225 mm.

Interfaces

  • 4 ports 10/100Base-Tx RJ-45 PoE;
  • 2 ports 1000Base-X SFP.

Switch supports any gigabit SFP-modules. 
Recommended SFP modules for use.

PoE

  • PoE standard: 802.3af/at;
  • Power per rort: min 60 W
  • PoE power budget for IP-video cameras: 160 W.

 

Features

  • Monitoring IP-video camera hanging.

 

Protocols

  • STP (802.1d)/RSTP(802.1w);
  • IGMP Snooping v2;
  • VLAN (802.1q);
  • Flow Control (802.3x);
  • Quality of Service(QoS, 802.1p).

 

Monitoring

  • SNMP v1, v3;
  • Cable tester;
  • SNMP Traps;
  • Syslog;
  • System log.

 

Management 

  • Web-interface;
  • Telnet;

 

Optical Distribution Frame

  • Splice-cassette for 32 WJPK;
  • Plate for SC (Duplex LC) adapters – 8 plcs

 

Power distribution unit 230VAC (version with power distribution board)

  • Screw-type terminal block;
  • Cable cross-section is 2.5 sq.mm.
  • Max total power – 3kW

 

Power distribution unit 230VAC (version with DIN-rail)

  • DIN-rail width: 35 mm;
  • DIN-rail length: 200 mm.

 

Warning! Type of the casing and glands are selected individually according to the customer’s requirements.

Warning! In case of DIN-rail version, the mounting clip options are selected by the customer.

 

*  For equipment implemented since 31.03.2016

Certificate (Declaration) of compliance with the Technical Regulation of the Customs Union “On Equipment Safety for Operation in Explosion Hazardous Areas”. No. ТС RU C-RU.AA87.B.00244
Validity: Until 12.02.2021
Declaration of compliance with the Technical Regulation of the Customs Union “On Safety of Low-Voltage Equipment”, “Electromagnetic Compatibility of Technical Devices” for Fort-Telecom equipment: Switches, Midspans, Media Converters. No. ТС N RU Д-RU.АЛ16.В.34692
Validity: 03.06.2014 - 02.06.2019
Declaration of compliance with the Technical Regulation of the Customs Union “On Safety of Low-Voltage Equipment”, “Electromagnetic Compatibility of Technical Devices” for Fort-Telecom equipment - PSW switches. No ТС RU C-RU.АЛ16.В.01739
Validity: 26.09.2014 - 25.09.2019
Move up